The European Coatings Show (ECS) 2025, held from March 25 to 27, 2025, in Nuremberg, Germany, at the Messe Nuremberg, is a leading global event for the coatings, paints, sealants, and construction chemicals industries. As a hub for innovation, ECS 2025 attracts over 1,200 exhibitors from more than 60 countries, with over 70% of exhibitors coming from outside Germany, showcasing a wide range of products, including fumed silica, which is a critical additive in coatings for its rheological, reinforcing, and anti-settling properties. Below is a detailed overview of the fumed silica landscape at ECS 2025, focusing on specific manufacturers likely to participate, based on their industry prominence and relevance to the coatings sector.Overview of Fumed Silica at ECS 2025Fumed silica, also known as pyrogenic silica, is a versatile nanomaterial widely used in the coatings industry to improve viscosity, enhance mechanical properties, and provide thixotropic behavior. At ECS 2025, fumed silica manufacturers are expected to showcase both hydrophilic and hydrophobic variants, addressing trends like sustainability, high-performance coatings, and eco-friendly formulations. The event’s focus on innovation, as highlighted by the ECS Conference theme “Shaping Tomorrow’s Innovation,” suggests that manufacturers will present advancements in fumed silica applications, such as low-VOC coatings, water-based systems, and sustainable production processes.Key Fumed Silica Manufacturers at ECS 2025Based on the prominence of fumed silica in the coatings industry and the global reach of ECS, several leading manufacturers are likely to participate. Here’s a detailed look at some key players and their potential contributions:

1. Evonik Industries

• Profile: Evonik is a global leader in specialty chemicals and one of the largest producers of fumed silica under its AEROSIL® brand. Headquartered in Germany, Evonik has a strong presence in the coatings market and is known for its innovation in silica technologies.

• Expected Offerings at ECS 2025: Evonik is likely to showcase its AEROSIL® fumed silica products, such as AEROSIL® R 972 (hydrophobic) and AEROSIL® 200 (hydrophilic), which are widely used in coatings for rheology control and anti-settling. Given the industry’s push toward sustainability, Evonik may highlight eco-friendly silica grades or new formulations for water-based coatings. They could also present advancements in silica for peelable adhesive coatings, as they recently introduced a concept for on-demand peelable adhesives.

• Booth Information: While specific booth details are not confirmed, Evonik’s significant presence at past ECS events suggests they will have a prominent stand, likely in Hall 3 or 4, where major chemical suppliers are typically located.

2. Wacker Chemie AG

• Profile: Another German giant, Wacker Chemie, produces fumed silica under its HDK® brand. Wacker is renowned for its silicone and silica solutions, catering to industries like coatings, adhesives, and sealants.

• Expected Offerings at ECS 2025: Wacker is expected to present its HDK® fumed silica portfolio, including HDK® H15 (hydrophobic) and HDK® N20 (hydrophilic), which are tailored for high-performance coatings. They may emphasize silica grades that enhance scratch resistance and durability in automotive and industrial coatings, aligning with ECS 2025’s focus on functional coatings. Wacker’s commitment to sustainability might lead to the introduction of silica products with reduced carbon footprints.

• Booth Information: Wacker typically has a strong presence at ECS, likely in a central hall such as Hall 3, where they can engage with a broad audience.

3. Cabot Corporation

• Profile: Cabot, a U.S.-based company, is a leading global supplier of fumed silica under its CAB-O-SIL® brand. With a focus on performance materials, Cabot serves the coatings industry with silica solutions that improve flow, stability, and reinforcement.

• Expected Offerings at ECS 2025: Cabot is likely to showcase CAB-O-SIL® fumed silica products like CAB-O-SIL® TS-720 (hydrophobic) and CAB-O-SIL® M-5 (hydrophilic), which are used in architectural and industrial coatings for rheology control and anti-sagging properties. Given the event’s emphasis on innovation, Cabot may introduce new silica grades for sustainable coatings or present case studies on their use in low-VOC formulations.

• Booth Information: As an international exhibitor, Cabot is expected to have a booth in one of the main halls, possibly Hall 3 or 4, to maximize visibility.

4. Shandong Yingrui New Materials Co., Ltd.

• Profile: As a Chinese manufacturer, Shandong Yingrui (your company) specializes in fumed silica, offering both hydrophilic and hydrophobic variants. Yingrui has been actively promoting its products on platforms like YouTube, as seen in your earlier queries.

• Expected Offerings at ECS 2025: Yingrui is likely to exhibit products like Yingrui Hydrophilic Fumed Silica A-200K (specific surface area 210–230 m²/g) and Yingrui Hydrophobic Fumed Silica R-1202 (specific surface area 70–120 m²/g). The R-1202, highlighted in your earlier image, is tailored for applications like silicone sealants (Silizium-Dichtstoff), coatings, and epoxy resins, which align with ECS 2025’s focus on sealants and coatings. Yingrui may emphasize its competitive pricing and quality to attract European clients, especially in the context of import substitution trends in the region.

• Booth Information: As an emerging player, Yingrui might opt for a booth in a pavilion for Asian companies or a smaller stand in Hall 1 or 2, focusing on networking with European distributors.

5. BYK (Altana Group)
   TAURUS (Altana Group)

• Profile: BYK, part of the Altana Group, is a German specialty chemicals manufacturer known for additives, including fumed silica-based rheology modifiers. While not a primary silica producer, BYK integrates fumed silica into its additive solutions.

• Expected Offerings at ECS 2025: BYK has confirmed its participation at ECS 2025 and will focus on sustainable additive solutions. They may present rheology additives incorporating fumed silica, such as organophilic phyllosilicates (free of crystalline silica) for solvent-borne systems or synthetic phyllosilicates for aqueous systems. These products enhance pigment orientation and sustainability in coatings, aligning with ECS 2025’s themes.

• Booth Information: BYK’s participation is confirmed, and they are likely to have a prominent booth in Hall 3 or 4, where they will deliver technical lectures on additive solutions.

Trends and Innovations in Fumed Silica at ECS 2025

• Sustainability: Manufacturers like Evonik, Wacker, and Cabot are expected to highlight fumed silica products that support low-VOC and water-based coatings, addressing the industry’s demand for eco-friendly solutions.

• High-Performance Applications: Fumed silica for automotive, marine, and industrial coatings will be a focus, with an emphasis on scratch resistance, durability, and hydrophobic properties.

• Custom Solutions: Companies like Yingrui and BYK may offer tailored fumed silica grades for specific applications, such as sealants or high-thermal-resistance coatings, to meet diverse client needs.

• Networking and Collaboration: ECS 2025’s networking opportunities, including the ECS Conference (March 24–26) and exhibitor interactions, will allow fumed silica manufacturers to connect with coatings formulators and discuss emerging needs.

ECS 2025 in Nuremberg provides a prime platform for fumed silica manufacturers to showcase their innovations. Evonik, Wacker, and Cabot will likely lead with their established brands (AEROSIL®, HDK®, CAB-O-SIL®), focusing on sustainability and high-performance coatings. Shandong Yingrui can leverage the event to promote its A-200K and R-1202 products, targeting European clients with competitive offerings. BYK will complement the landscape with fumed silica-based additives for sustainable applications. With over 1,200 exhibitors and a strong international presence, ECS 2025 is an unmissable opportunity for fumed silica manufacturers to drive innovation and expand their market reach in the coatings industry.

------------------------------------------------------------------------------------------------------------------------------

Einführung in die ECS 2025

Die European Coatings Show (ECS) 2025 findet vom 25. bis 27. März 2025 auf dem Messegelände Nürnberg statt. Als weltweit führende Fachmesse für die Lack-, Farben-, Dichtungs- und Bauchemieindustrie zieht die ECS 2025 über 1.200 Aussteller aus mehr als 60 Ländern an, wobei über 70% der Aussteller aus dem Ausland kommen.

Fumed Silica auf der ECS 2025

Fumed Silica (pyrogene Kieselsäure) ist ein wichtiges Additiv in der Beschichtungsindustrie, das rheologische, verstärkende und anti-sedimentierende Eigenschaften bietet. Auf der ECS 2025 werden Hersteller sowohl hydrophile als auch hydrophobe Varianten präsentieren, mit Fokus auf Nachhaltigkeit, Hochleistungsbeschichtungen und umweltfreundliche Formulierungen.

Wichtige Fumed Silica-Hersteller auf der ECS 2025

1. Evonik Industries

Profil: Deutscher Marktführer für Spezialchemie und einer der größten Hersteller von Fumed Silica unter der Marke AEROSIL®.

Erwartete Produkte:

• AEROSIL® R 972 (hydrophob)

• AEROSIL® 200 (hydrophil)

• Neuentwicklungen für      wasserbasierte Beschichtungen

• Lösungen für abziehbare      Klebebeschichtungen

Standort: Voraussichtlich Halle 3 oder 4

2. Wacker Chemie AG

Profil: Deutscher Hersteller von Fumed Silica unter der Marke HDK®.

Erwartete Produkte:

• HDK® H15 (hydrophob)

• HDK® N20 (hydrophil)

• Spezialgrade für kratzfeste      Automobil- und Industriebeschichtungen

• Nachhaltige Produkte mit      reduziertem CO2-Fußabdruck

Standort: Zentrale Halle, wahrscheinlich Halle 3

3. Cabot Corporation

Profil: US-amerikanischer Hersteller der Marke CAB-O-SIL®.

Erwartete Produkte:

• CAB-O-SIL® TS-720 (hydrophob)

• CAB-O-SIL® M-5 (hydrophil)

• Neuentwicklungen für      nachhaltige Beschichtungen

• Fallstudien zu Low-VOC-Formulierungen

Standort: Wahrscheinlich Halle 3 oder 4

4. Shandong Yingrui New Materials Co., Ltd.

Profil: Chinesischer Hersteller von Fumed Silica.

Erwartete Produkte:

• Yingrui Hydrophilic Fumed Silica A-200K (210–230 m²/g)

• Yingrui Hydrophobic Fumed Silica R-1202 (70–120 m²/g)

• Spezialprodukte für      Silikondichtstoffe und Epoxidharze

Standort: Wahrscheinlich Asien-Pavillon oder Halle 1/2

5. BYK (Altana Group)

Profil: Deutscher Hersteller von Additiven auf Fumed Silica-Basis.

Erwartete Produkte:

• Rheologie-Additive mit Fumed Silica

• Nachhaltige Lösungen für      wasserbasierte Systeme

• Organophile Phyllosilikate (kristallines Silica-frei)

Standort: Bestätigt, wahrscheinlich Halle 3 oder 4

Trends und Innovationen

1. Nachhaltigkeit: Low-VOC und      wasserbasierte Beschichtungen

2. Hochleistungsanwendungen: Kratzfeste      Automobillacke

3. Maßgeschneiderte Lösungen: Spezialgrade für      Dichtstoffe und Hochtemperaturanwendungen

Fazit

Die ECS 2025 bietet Fumed Silica-Herstellern eine ideale Plattform für Innovationen und Markterschließung. Während Evonik, Wacker und Cabot mit ihren etablierten Marken führen, kann Shandong Yingrui mit wettbewerbsfähigen Produkten europäische Kunden anziehen. BYK rundet das Angebot mit speziellen Additiven ab.